PRODUCTION OF SOLAR CELLS AND ESTIMATION OF ITS ELECTRICAL PARAMETERS FROM ITS EXPERIMENTAL CHARACTERIZATION
DOI:
https://doi.org/10.22395/rium.v21n40a2Keywords:
thin film solar cell, parameter estimation, diode model, optimization, CISAbstract
In this work, solar cells with Mo/CuInSe2/CdS/n+–ZnO structure were deposited and experimentally characterized by the I-V curve. From these results, the electrical parameters were estimated fitting, theoretically, the curve to determine the most important variables. The estimation was carried
out using the single and double diode models and comparing the curve that best fits. The estimated variables were photogenerated current (Iph), dark current of the diode (Is), series resistance (Rs), shunt resistance (Rp) and diode ideality factors (a1 and a2) according to each model of circuit taken for optimization. The adjustment of the current-voltage (I-V) and power-voltage (P-V) curves achieved with the double diode
model indicates that in the manufactured solar cells, interfacial states are present in the p-n junction, which decreases the efficiency of the device.
Downloads
References
NREL chart, https://www.nrel.gov/pv/cell-efficiency.html accessed Apr. 2, 2022.
M. Nakamura, K. Yamaguchi, Y. Kimoto, Y. Yasaki, T. Kato, and Hiroki Sugimoto, “Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with a new world record efficacy of 23.35%â€, IEEE Journal of Photovoltaics, vol. 9, no. 6, pp.1863-1867, 2018. doi: 10.1109/JPHOTOV.2019.2937218
M. Green, E. Dunlop, J. Hohl-Ebinger, M. Yoshita, N. Kopidakis, and X. Hao, “Solar cell efficiency tables (version 57)â€, Progr. Photovolt. Res. Appl., vol. 29 pp. 3-15, 2021. doi:10.1002/pip.3371
R. Carron, S. et al., “Advanced alkali treatments for highâ€efficiency Cu(In,Ga)Se2 solar cells on flexible substratesâ€, Advanced Energy Materials, vol. 9 no. 24, 1900408, 2019. doi: 10.1002/aenm.201900408
Nunes, H.G.G., Pombo, J.A.N., Bento, P.M.R., Mariano, S.J.P.S. and Calado, M.R.A. “Collaborative swarm intelligence to estimate PV parameters.†Energy Conversion and Management, vol. 185, pp. 866-890, 2019.
Li, S., Gong, W., Yan, X., Hu, C., Bai, D., Wang, L. and Liang Gao. “Parameter extraction of photovoltaic models using an improved teaching learning-based optimizationâ€. Energy Conversion and Management, vol. 186, pp. 293-305, 2019.
Abhishek Sharma, Abhinav Sharma, Moshe Averbukh, Vibhu Jately, and Brian Azzopardi, “An Effective Method for Parameter Estimation of a Solar Cellâ€, Electronics, vol. 10, pp. 312-334. doi: 10.3390/electronics10030312.
Tom Markvart and Luis Castañer. Solar Cells: Materials, manufacture and operation. Elsevier. 2006
Radu D. Rugescu. Solar Energy. Intech. 2010
Kalogirou, Solar Energy engineering. Processes and systems, Elsevier, 2009.
Goetzberger, A. and Hoffmann, V.U. Photovoltaic Solar Energy Generation, Springer, 2005.
Jäger, K., Isabella, O., Smets, A.H.M., van Swaaij, R.A.C.M.M. and Zema, M. Solar Energy, Fundamentals, Technology, and Systems, Delft University of Technology, 2014.
GAMS. https://www.gams.com/, accessed Jan. 4, 2021
CONOPT3. http://www.conopt.com/, accessed Jan. 4, 2021
V. Rangel-Kuoppa, et al., “Shunt resistance and saturation current determination in CdTe and CIGS solar cells. Part 2: application to experimental IV measurements and comparison with other methodsâ€, Semiconductor Science and Technology, vol. 33, no. 4, 045008, 2018. doi: 10.1088/1361-6641/aab018.
V. Huhn, B. E. Pieters, A. Gerber, Y. Augarten, and U. Rau, “Determination and modeling of injection dependent series resistance in CIGS solar cells,†in IEEE 44th Photovoltaic Specialist Conference (PVSC), Washington, DC, 2017, pp. 1651-1655. doi: 10.1109/PVSC.2017.8366402.
M. Theelen, K. Beyeler, H. Steijvers, and N. Barreau, “Stability of CIGS solar cells under illumination with damp heat and dry heat: A comparisonâ€, Solar Energy Materials and Solar Cells, vol. 166, pp. 262-268, 2017. doi: 10.1016/j.solmat.2016.12.039
Downloads
Published
How to Cite
Issue
Section
License
The total or partial reproduction of the contents of the journal for educational, research, or academic purposes is authorized as long as the source is cited. For reproduction for other purposes, express authorization from the Sello Editorial Universidad de MedellÃn is required.
