Security system for overloading of a subsoiler
DOI:
https://doi.org/10.22395/rium.v15n28a11Keywords:
Security device, mechatronics, overloading, subsoilerAbstract
Currently, rural technological development has emerged as a response to the need for improving production efficiency in the fields, especially in agricultural countries such as Colombia due to aspects such as demographic growth and economic globalization; the use of a subsoiler is the first activity performed, intended to loosen soil as a way of reducing its resistance and allowing the spread of plant roots and flow of water. Hence, any type of abnormal circumstances in the development of this activity results in delays in future works or decrease of crop efficiency. This article shows the results of a technological research, focused on mechatronic adequacy of a subsoiler implement addressed under a structured design procedure that assures technological adaptations by assuring the operation of a control instrumented system with response to overloading
Downloads
References
[2] I. M. Johnston, “Classic Tractor Tales. The first tractor engines,†The Australian Cottongrower, pp. 68-71, December 2003.
[3] J. MejÃas, J. A. MartÃnez y I. MacÃas, “Impacto Ambiental De La Introducción De Un Prototipo AgrÃcola Para La Labranza De Conservación,†Revista DELOS: Desarrollo Local Sostenible, vol. 6, n.º 16, pp. 1-14, February 2013.
[4] V. Ortiz, “Diseño, construcción y evaluación de un sistema de arado de discos reversible,†Latacunga, Ecuador, 2008.
[5] A. Celik y R. L. Raper, “Design and evaluation of ground driven rotary subsoilers,†Soil & Tillage Research, vol. 124, pp. 203-210, August 2012.
[6] Y. You, D. Wang y J. Liu, “A divice for mechanical remediation of degraded grasslands,†Soil & Tillage Research, vol. 118, pp. 1-10, January 2012.
[7] J. P. Corredor, “Desarrollo de un sistema de control en la aplicación de técnicas selectivas de eliminación de maleza,†Bogotá, 2011.
[8] M. F. Polanco, Maquinaria y mecanización agrÃcola. Universidad Abierta y a Distancia 2007.
[9] J. Stafford, “The performance of a rigid tine in relation to soil properties and speed,†Journal of Agricultural Engineering Research, vol. 24, n.º 1, pp. 41-56, March 1979.
[10] J. Stafford, “Force prediction models for brittle and flow failure of soil by draught tillage tools,†Journal of Agricultural Engineering Research, vol. 29, n.º 1, pp. 51 -60, January 1984.
[11] D. Hettiaratchi, B. Witney y A. Reece, “The calculation of passive pressure in twodimensional soil failure,†Journal of Agricultural Engineering Research, vol. 11, nº 2, pp. 89- 107, June 1966.
[12] D. Hettiaratchi y A. Reece, “Symmetrical three-dimensional soil failure,†Journal of Terramechanics, vol. 4, n.º 3, pp. 45-67, 1967.
[13] “IEEE Standard for Funtional Modeling Language - Syntax and Semantic for IDEF0,†IEEE Std 1320.1-1998, p. I, 1998.
[14] E. Hull, K. Jackson y J. Dick, Requirements Engineering, London: Springer, 2011.
[15] B. C. Falgueras, IngenierÃa de software, UOC, 2002.
[16] C. Cassiolato, “smar,†3 July 2013. [En lÃnea]. Available: http://www.smar.com/en/technicalarticles/article.asp?id=132. [Último acceso: 1 July 2014].
[17] ATOS, “ATOS on line,†[En lÃnea]. Available: http://www.atos.com/espanol/technical_tables/espanol/TF060.pdf. [Último acceso: 15 July 2014].
[18] OMEGA, “OMEGA,†[En lÃnea]. Available: http://www.omega.com/Pressure/pdf/XDUCER_GAGES.pdf. [Último acceso: 20 July 2014].
Additional Files
- Tabla 1 (Español (España))
- Tabla 2 (Español (España))
- Tabla 3 (Español (España))
- figura 1 (Español (España))
- figura 2a (Español (España))
- figura 2b (Español (España))
- figura 3 (Español (España))
- figura 4 (Español (España))
- Figura 5 (Español (España))
- Figura 6 (Español (España))
- Figura 7 (Español (España))
- figura 8 (Español (España))
- figura 9 (Español (España))
- Figura 10 (Español (España))
- figura 11 (Español (España))
- figura 12 (Español (España))
- figura 13 (Español (España))
- figura 14 (Español (España))
- figura 15 (Español (España))
- figura 16 (Español (España))
- Carta formato originalidad cesion (Español (España))
- Documento corregido (Español (España))
Published
How to Cite
Issue
Section
License
The total or partial reproduction of the contents of the journal for educational, research, or academic purposes is authorized as long as the source is cited. For reproduction for other purposes, express authorization from the Sello Editorial Universidad de MedellÃn is required.